Description
[full_width_section bg_pos=”left top” bg_repeat=”no-repeat” text_color=”dark_text” image_url=”” top_padding=”10″ bottom_padding=”10″ background_color=”#ffffff”]
GTECHNIQ G1 Clearvision Smart Glass 100ml
Why Use Gtechniq G1 ClearVision Smart Glass?
Unlike regular rain repellent coatings that adhere to the surface of the glass using relatively weak physical bonds, G1 uses a chemical bond which gives G1 unrivalled durability. G1 ClearVision Smart Glass is extremely durable, the hydrophobic function improves wet weather visibility helping to improve safety and eye strain. It also makes removing contaminants from the glass such as ice, bugs and tree sap much easier.
[/full_width_section]
[full_width_section bg_pos=”left top” bg_repeat=”no-repeat” text_color=”light_text” image_url=”” top_padding=”15″ bottom_padding=”15″ background_color=”#ffffff”]
Application Instructions
[one_half boxed=”true” animation=”none” delay=””]
- Make sure you are working in a well ventilated area, in a temperature that is 5°c or above
- Wear gloves and do not apply in direct sunlight
- Clean all glass you are going to protect with G6 Perfect Glass and a Fish Scale Glass Cloth
- For best results machine polish the glass with G4 Nano Glass Polish and a medium pad. Or alternatively, polish the glass with G4 Nano Glass Polish and a hand polishing pad. Apply a small amount and polish in a circular motion
- Once finished, clean the glass back to a shine with G6 Perfect Glass and an MF5 or MF6 Haze Buster – repeat this as many times as needed to remove all residue
- Shake bottle well before use
- For windscreens we recommend using 3 layers of G1, but for side and rear screens only 1 layer is needed
- Apply a liberal amount of G1 to a Whisper Soft Applicator Pad
- Work product into the glass in a circular motion covering all of the glass, and leave to cure for 5 minutes
[/one_half]
[one_half_last boxed=”true” animation=”none” delay=” “text_color=”#ffffff”]
- Using a new AP1 apply the same amount of product to the pad, but this time put G1 over your previous layer in a side to side motion, leave for a further 5 minutes to cure
- Apply your third layer with the same amount of product on a AP1, however this time apply in vertical straight lines, leave to cure for 15 minutes
- Remove cured residue, with G2 Residue Remover. Dab the G2 onto the remaining applicator and apply to a small area at a time, then buff the glass immediately with an MF1 cloth
- Finish by cleaning the wiper blades and glass with G6 Perfect Glass and an MF5
- We recommend you apply a layer of G1 on your wiper blades without removing residue. If wiper blades are worn they should be replaced
- Do not expose your car to the elements for at least 12 hours
- Store in a cool, dry place
- Use G1 and G2 within 3 months of opening
- There may be some wiper blade judder, in 90% of cases this will disappear within two weeks.
[/one_half_last]
[/full_width_section]
Reviews
There are no reviews yet.